Coating China in Cheongju Republic of Korea floating shaft gear coupling factory Machine in Florence Italy motor gearbox coupling for Paper Making with top quality lowest price

Coating  China  in   Cheongju Republic of Korea   floating shaft gear coupling  factory  Machine  in   Florence Italy   motor gearbox coupling for Paper Making with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Chapter I Introduction

2200mm coated paper production line, suitable for single side coating of base paper with quantitative quantity of 90-350g /m, total coating amount of 30-70g /m, design speed of 150m/min.Machine configuration: heavy biaxial put paper + high speed automatic high precision hydraulic pick machine + an air knife coating machine, drying oven group 7 + network automatic pickup device + two positive blade coating head group 6 + + drying oven dry heat network device and the seasoning cylinder, double roll line pressure soft calender equipment + + horizontal paper finishing cylinder coated paper winding equipment + under high speed frame type rewinding paper cutting machine.
High performance inverter, PLC, touch screen, hard tooth surface reducer; Heavy frame and cast iron foundation plate; Preparation of new process coatings.
                                                                                                        

Chapter II Technical Requirements

Width of base paper 2250mm
Net paper width 2200mm
Amount of coating (Max) 30-70g /m
Coating solid content (Max) 40%-70%
Design speed 150m/min
Production capacity 60 tons/day (200g/m2 for 22 hours per day)
Working speed 100-130m /min
Steam heating 0.8mpa
Pneumatic control 0.8mpa
Paper drawing method high speed automatic drawing of dry net without stopping
Transmission mode AC variable frequency partial transmission
Place of Making China

Chapter III structure specification

 1.Hydraulic double-axle paper backing rack: The paper rack is a new type, the paper roll lifting and loosening is controlled by the hydraulic cylinder accurately and firmly.

2.Automatic paster: This paper receiving machine selects the latest high-speed paper receiving configuration, compared with the previous configuration of high speed paper receiving rate is lower.

3Air knife coating head:ir knife using a new type of coated paper, coated paper this special paper coating amount is more stable, more uniform,

4.scraper coater:Used for the front coating of paper. The modified coating is more accurate and the paper surface is flatter than before.

5.Dry part:The drying box is composed of 13 sets of 2.5mx2.64m hot air drying boxes, 13 sets of heating fans, 13 sets of radiators and 13 sets of ventilation devices.

6.Dry mesh device:The dry screen device consists of two sets of chrome-plated guide roller diameter, chrome-plated return roller diameter, driving rubber roller diameter, manual tensioning device, pneumatic calibrator, hard tooth surface reducer transmission and so on.

7.Double roll soft pressing:After the paper is finished by the calender, the paper surface is smooth and smooth.

8.Hot and cold adjusting cylinder:The hot and cold regulating cylinder consists of 2 sets of chrome-plated cylinders with diameters of 1000 and 800 mm.

9.Horizontal reel paper machine:Roll paper cylinder ø900mm, surface width 2420mm, cylinder body is cast iron.

10.Basic part:The frame and the doctor blade coater, the adjusting cylinder, the soft calender, the thermal adjusting cylinder, the paper reel, the back sizing, and the paper rack are all made of cast iron base plate, equipped with anchor bolts and nut oblique The shim uses two grouting to make the base plate firmer and less deformed.

11.Rack:It is used for the installation and fixing of paper guide roller, dryer, transmission system, compressed air system, walking table, etc. It is composed of beams, columns, fixed-distance beams, etc. All are made of section steel, and the surface is painted with anti-rust paint and a certain color paint according to user requirements.

12.Walk the stage: The walking platform is made of ordinary steel with pedals, brackets and escalators, and the surface is coated with anti-rust paint.

13.Transmission part:Frequency conversion and speed regulation division transmission, including transmission parts such as motors, reducers, couplings, gears, frequency converters, control cabinets, and consoles.

14.Paint preparation part:High-speed dispersing machine 2 sets/37KW (dispersion tank adopts stainless steel welding), mainly used for crushing porcelain clay, composed of motor, frame, bearing chamber, transmission shaft, stainless steel dispersing disc, etc.
                                                                                    

We Still Sales all parts of coating machine

  Description of Goods QTY
1 Hydraulic paper carrier 1 set
2 Air knife coating head 1 set
3 Scraper coating head (for rod scraping) 1 set
4 Automatic paper receiving machine 1 set
5 Hot air drying oven system 13 set
6 Rack, foundation 1 set
7 Network device 2 set
8 Paper guide roll 35 set
9 ¢1000 thermal cylinder 1 set
10 Two roll calender 1 set
11 ¢800 cold cooled cylinder 1 set
12 Horizontal paper winding machine 1 set
13 Frame rewinding machine 1 set
14 Coating preparation system full set
15 EPT control system 1 set
16 Back with glue 1 set

Pre-Sales Service
1.Offering comprehensive technical and business consultation services;
2.Proposing the most suitable scheme and equipment for our clients;
3.Designing and fabricating targeted products according to the special requirements of clients;
4.Training periodically high qualified service technician.

After-Sales Service
1.Highly inspecting equipments in every working procedure, quality comes first;
2.Fast & Safe Delivery;
3.Assisting our clients for foundation construction of equipments;
4.Dispatching engineers to install and debug equipments;
5.Training the first-line operators on site;
6.Regularly visit clients to solve production problems;
7.Providing life-long maintenance service;
8.Providing technical exchanging.
 

FAQ

1.What’s the Trade and Payment Terms?
A: FOB, CFR and CIF all acceptable. TT, 40% in advance, balance payment before shipment. L/C at sight.

2. Q: When will delivery the goods?
A: Usally, we will deliver the goods within 10 working days. And if the quantity is big, it will take about 15-30 working days..

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Coating  China  in   Cheongju Republic of Korea   floating shaft gear coupling  factory  Machine  in   Florence Italy   motor gearbox coupling for Paper Making with top quality lowest price